|
|
|
J-Model Hospital
Unit
The J Model is
MedWaste TEC’s most economical waste management system. It
is ideal for small hospitals, labs and other infectious waste
generators, and can be installed in the user’s facility or
a custom designed container/enclosure as required. The system
incorporates an in-feed conveyor, our patented multi-stage
impact mill, mixing drum, chemical injection, exit conveyor
and full negative air flow system.
This is a time/retention process. The waste is loaded onto
the in-feed belt conveyor and conveyed to the impact mill
where it is macerated and then conveyed to the kill tank/mixing
drum. During transit from the mill to the drum, the chemical
is injected into the waste stream. The drum rotates in a mixing
mode for a programmed period of time to insure complete contact
between the chemical and waste. The retention time is 120
minutes, and during this time the drum will go into a mixing
cycle at the pre-programmed intervals. At the end of the retention
time, the treated waste can be removed through the exit conveyor
and deposited in a dumpster or compactor to be removed as
general waste.
Although the J Model lacks some of the high-tech components
of other LFB 12-5 models, the basic structural components
of the system are of the same high quality and durable construction.
The J Model is more of a hands-on system requiring the operator
to be responsible for chemical and water mix as well as batch
control by bag count or pre-weighting. The rest of the system
runs itself.
To provide an economical waste treatment system where speed
and time are not required, MedWaste TEC has eliminated some
of the hi-tech components from the process such as the pressurization
cycle, continuous weight analysis, and the sophisticated chemical
mixing system. These systems require expensive programming
and controls and their elimination reduces the cost of the
equipment.
|
SF-Model Hospital
Unit
The SF-Model is
a fixed base system that can be installed in the customer’s
facility or a custom designed container or enclosure suited
to the environmental requirements of the region. The SF generally
addresses four sizes of waste requirements:
• Small demand of 300 to
600 pounds per hour = SF6
• Medium demand of 600 to
1,000 pounds per hour = SF10
• Large demand of 1,000 to
1,500 pounds per hour = SF12
• Commercial demand of up to 2,000 pounds + per hour = SF15C
The LFB SF and J Model processes are ideal for on-demand treatment
of waste. As waste is picked up at the various source locations,
the housekeeping attendants simply transport the material
directly to the waste management system, turn on the machine,
place the waste on the conveyor, process the batch and return
to their other duties. The system provides safe storage and
continuous treatment of the waste. This process can continue
until a pre-determined amount of waste has been deposited
into the system, up to 3,000 pounds*. This process can continue
for as many days as required to achieve treated waste goals.
The LFB series offers on demand treatment, ongoing safe storage
and economy of operation.
*Depending upon the model type.
|
|
|
|
|
|
|
|
